What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 02:31

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
It seems Mohan does not understand the difference between a comment and an Answer.
What are some effective ways to cope with loss and grief?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
a photo is worth a thousand words.
so, what happens?
Do you think the constitution and laws should be taught in school?
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
Shouldn’t there be a short porn platform like TikTok?
nine
This is where this question deviates from being a 'generic' question, and becomes more specific.
the problem then depends on "how fast does the fuse operate?".
Galerie David Guiraud : Deep Space & Celestial Objects - The Eye of Photography
but this device (an Inductor) … impedes the rapid changes in the current.
Because the load is inductive, the current lags the voltage.(by a bit).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Is having white skin really that attractive?
At one ohm, the resistor has a maximum of 1 watt power.
One
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Some men love anal sex more than vaginal sex. Why?
Now when you have a certain ac resistance, then a current flows in a loop.
but I think this circuit , shows a few more pieces.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why do nice guys rarely or never win?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It also is a device that limits the change in current flow.
This one hit behind the barn.
What 10 things have you stopped doing in your life?
what exactly is a ‘surge’ protector?
eight
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
963 RSP Revealed: Meet Porsche's Street-Legal Le Mans Hypercar - Motor1.com
The third is lightning and “how it gets conducted into a home.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
First Sentence:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then describes Rainy Season and Lightning.
Why are leftist movements so popular among young people?
[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But it can get overloaded, and no longer works.
Why do I like to eat my own cum?
At least they know the answer if they wanted it.
He then asserts :
But… the neutral is now “floating” because of the 1 ohm resistance.
How AI chatbots keep you chatting - TechCrunch
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
NASA’s Webb Rounds Out Picture of Sombrero Galaxy’s Disk - NASA Science (.gov)
Here is a simplified AC power diagram.
For this case there are devices called Metal oxide varistors (MOV).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One is “what exactly is in a ‘surge protector’ ? ”
A circuit breaker is similar, but is resettable.
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
There are two important concepts here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
I post the exact comment here.
Edit 2024–10.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
In schematic diagrams this is the symbol for a fuse:
Barnstars:
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
These are simplified answers to the original question, and does not change anything I wrote above.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is where the MOV conducts again, and dissipated the energy.
These devices are installed between the “hot” and “neutral” and protective ground.
[old diagram got deleted by accident]
The bolt then partially travels down the line to your home.
2024–10–16 [ OO OLAOYE OYEBODE ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.